Reddy-Buffaloes Pump, Inc.

Hydraulic Institute

Reddy-Buffaloes Pump, Inc. Corporate Profile

R-B Pump was established in 1980 in Baxley, GA. R-B Pump, Inc. offers one of the largest selections of UL listed and FM approved, horizontal splitcase, vertical turbine, inline and end suction fire pumps in the industry, manufactured to NFPA standards. Our fire pumps are available in diesel engine or electric motor driven varieties, and we can provide packaged systems, complete with base and all the necessary accessories and fittings as required by NFPA-20. We also provide specialty pumps for the U.S. Navy, designed per MIL standards, and for use on dry docks around Navy shipyards. For the Air Force, Coast Guard and Army, we manufacture MIL standard, self-priming pumps for pumping fuel and water.

  • Market Profile
    • Food Industry
    • Marine Industry
    • Mining
    • Petroleum Refining
    • Water Utility
    • Recreational Industry
    • Electric Power
    • Building Industry (includes HVAC)
    • Agriculture
    • Metal Mfg. & Mineral Ore Proc.
    • Chemical Industry
    • Miscellaneous Markets
    • Export
    • Resale Sales Where End-Use is Unknown
  • Product Profile
    • Centrifugal Pumps: Two stage, volute or diffuser design, axially split case
    • Centrifugal Pumps: Single stage, single suction, self-priming non-clog design
    • Centrifugal Pumps: Submersible single stage, end suction, close coupled, dry pit
    • Vertical Pumps: Vertical turbine pumps 16 inches and smaller, deep well
    • Centrifugal Pumps: Vertical centrifugal sump pumps
    • Centrifugal Pumps: Single or multi stage, axially split case, approved fire pumps
    • Vertical Pumps: Vertical turbine pumps 16 inches and smaller, short setting
    • Vertical Pumps: Vertical turbine pumps 6 inches or larger with submersible motors
    • Centrifugal Pumps: Non-clog, single stage, end suction, 12 inch or less discharge
    • Vertical Pumps: Vertical turbine pumps 16 inches and smaller, can or pot type
    • Centrifugal Pumps: Single stage, end suction, foot mntd ANSI B73.1 compliant
    • Centrifugal Pumps: Non-clog, single stage, end suction, over 12 inch discharge
    • Vertical Pumps: Vertical turbine pumps 17 inches through 36 inches
    • Centrifugal Pumps: Single stage, end suction, elastomer lined or hard metal
    • Vertical Pumps: Vertical propeller and mixed flow pumps, diffuser design to 36 inches
    • Vertical Pumps: Vertical turbine pumps 17 inches through 36 inches, can or pot type
    • Centrifugal Pumps: Single and two stage, end suction, close coupled
    • Centrifugal Pumps: Single stage, end suction, recessed impeller design
    • Vertical Pumps: Vertical propeller, mixed flow and radial flow, diffuser over 36 inches
    • Vertical Pumps: Vertical turbine pumps under 6 inches with submersible motors
    • Centrifugal Pumps: Single stage, end suction, frame mounted, up to 6 inch discharge
    • Centrifugal Pumps: Two stage, volute or diffuser design, radial split case
    • Centrifugal Pumps: Single stage, end suction, frame mounted, over 6 inch discharge
    • Centrifugal Pumps: Submersible single stage, end suction, close coupled, wet pit
    • Centrifugal Pumps: Single stage, axial split case, double suct. imp., 6 inch and below
    • Vertical Pumps: Vertical turbine approved fire pumps
    • Centrifugal Pumps: Single stage, axial split case, double suct. imp., over 6 inches
    • Centrifugal Pumps: Navy shipboard, N stamp, multistage double case barrel type
  • Trade Names
    • R-B Pump, Inc
    • Reddy-Buffaloes Pump, Inc.

MORE INFORMATION

If you would like to receive more information on membership, complete our Information Request Form or contact Membership@Pumps.org.