|
-
Drivers Application Guidebook: Electric Motors
Release Date: August 2019
Scope: 'It is widely accepted that the most commonly used drivers for pumps are electric motors. This guidebook provides a comprehensive review of application, installation, maintenance, and troubleshooting insights of electric motors. Additionally, this document imparts guidance and understanding on the selection, specification, and operation of electric motors including considerations when installing into a pumping system.
Discount Amount:
Coupon Active Through:
Available in Hardcopy Format
Available in PDF Format
Rotodynamic Pumps for Nomenclature & Definitions (ANSI/HI 14.1-14.2 - 2019)
Release Date: July 2019
Scope: 'This standard is for types, nomenclature, and definitions of rotodynamic pumps with radial, mixed flow, and axial flow impellers, as well as regenerative turbine, Pitot tube, vertical diffuser, submersible motor deep-well and shortset pumps, commonly defined as vertically suspended rotor and vertical overhung impeller types (that may be driven by vertical electric motors or horizontal engines with right-angle gears) of all industrial/commercial types.
Discount Amount:
Coupon Active Through:
Available in Hardcopy Format
Available in PDF Format
Rotodynamic Pumps for Design and Application (ANSI/HI 14.3 - 2019)
Release Date: February 2019
Scope: 'The purpose of this standard is to provide guidance and recommendations for the general application and design of rotodynamic pumps. This standard provides accepted methods for the evaluation of the hydraulic performance and design of all related and supporting equipment. It does not include detailed hydraulic design methods. This standard recognizes and identifies application requirements, principal features, performance considerations, and the necessary precautions for proper use of rotodynamic pumps.
Discount Amount:
Coupon Active Through:
Available in Hardcopy Format
Available in PDF Format
Controlled-Volume Metering Pumps for Test (ANSI/HI 7.6 - 2018)
Release Date: September 2018
Scope: 'The ANSI/HI 7.6 provides detailed procedures for controlled-volume metering pump performance testing along with an optional NPSH test. The following tests are covered:
- Functional testing of production units
- Mechanical integrity at speed and pressure specified
- Rate of flow and mechanical integrity at speed and pressure specified
- Verification of performance to the manufacturer's specifications
Discount Amount:
Coupon Active Through:
Available in Hardcopy Format
Available in PDF Format
-
|